序号 | 第一作者 | 论文（著作）名称 | 时间 | 类别 | 级别 | 出版单位 |
1 | 乔凯 | A Hierarchical Coupled Multiscale Analysis for the Tensile Damage Behavior of Notched 3D Woven Composites | 2023.03 | SCI | 1区 | Composite Structures |
2 | 明玥 | Flame resistance and oxidation behaviour of Mg–xCa (x = 0.3, 1.0, 2.0 and | 2023.05 | SCI | 1区 | Corrosion Science |
3 | 黄传辉 | S-scheme effcient charge transfer interface between solid solution Mn0.5Cd0.5S and ultrathin 2D nanomaterial SnNb2O6 boosts photocatalytic CO reduction 2 | 2023.01 | SCI | 2区 | COLLOIDS AND SURFACESA-PHYSICOCHEMICALANDENGINEERING ASPECTS |
4 | 宋威 | Comprehensive fatigue assessment for different types of aluminum fillet welded joints by local approaches | 2023.02 | SCI | 2区 | Thin-Walled Structures |
5 | 宋威 | Fatigue failure investigation of thick plate butt-welded joints with incomplete penetration effect | 2023.01 | SCI | 2区 | Fatigue and Fracture of Engineering Materials and Structures |
6 | 谢奇志 | Application of TRIZ Innovation Method to In-Pipe Robot Design | 2023.09 | SCI | 3区 | Machines |
7 | 谢奇志 | Design of an In-Pipe Robot Coupled With Multiple Cams | 2023.10 | SCI | 3区 | IEEE ACCESS |
8 | 郭华锋 | Study on Erosion Behavior of Laser Wire Feeding Cladding | 2023.08 | SCI | 3区 | Materials |
9 | 宋威 | Fatigue Crack Growth Behavior of Different Zones in an Overmatched Welded Joint Made with D32 Marine Structural Steel | 2023.03 | SCI | 3区 | Metals |
10 | 刘丽丽 | The Design of a Biomimetic Hierarchical Thin-Walled Structure Inspired by a Lotus Leaf and Its Mechanical Performance Analysis | 2023.05 | SCI | 3区 | Materials |
11 | 刘丽丽 | Enhanced Grey Wolf Optimization Algorithm for Mobile Robot Path Planning | 2023.09 | SCI | 3区 | electronics |
12 | 刘磊 | Experimental Study of Surface Damage of Stainless Steel Subjected to Cavitation Collapse in Aqueous Environment | 2023.01 | SCI | 3区 | coatings |
13 | 孟鑫 | PARTICULATE MATTER CHEMICAL CHARACTERISTICS FROM A LIGHT-DUTY DIESEL ENGINE FUELED WITH PODE/DIESEL BLENDS | 2023.01 | SCI | 4区 | International Journal of Automotive Technology |
14 | 刘丽丽 | A Study of the Mechanical Properties of Naturally‐Inspired Tubular Structures Designed for Lightweight Applications | 2023.05 | SCI | 4区 | Applied Sciences |
15 | 刘丽丽 | Research on Influences of Ultrasonic Vibration Agitation Stirring on Carbonation Resistance of Cement-Based Materials after Absorption of CO2 | 2023.03 | SCI | 4区 | Applied Sciences |
16 | 赵恩兰 | Microstructure and Wear Behavior of Laser-Remelted High-Manganese Steel | 2023.02 | SCI | 4区 | Journal of Materials Engineering and Performance |
17 | 李龙海 | Design optimization of lightweight structures inspired by the rostrum in Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae) | 2023.01 | SCI | 4区 | Materials Research |
18 | 满家祥 | 曲轴摆缸式阀配流水液压马达工作特性研究 | 2023.01 | EI | 期刊 | 农业机械学报 54(01): 450-458. |
19 | 赵恩兰 | 高锰钢的超声冲击强化和抗磨损机理 | 2023.06 | EI | 期刊 | 中国表面工程 |
20 | 宋威 | 含错位效应十字焊接接头疲劳可靠性评估 | 2023.06 | EI | 期刊 | 焊接学报 |
21 | 张元越 | 3D observation of grain pile based on projection light and dual cameras | 2023.01 | EI | 会议 | Proceedings of SPIE |
22 | 渠向举 | Grain loading condition monitoring based on dual cameras in intelligent cluster grain truck | 2023.01 | EI | 会议 | Proceedings of SPIE |
23 | 秦录芳 | 正交车铣已加工表面微观形貌仿真 | 2023.11 | 核心 |
| 机械设计与制造 |
24 | 何敏 | 螺旋通道转角挤压变形对铝合金6005静态峰时效影响研究 | 2023.10 | 核心 |
| 锻压技术 |
25 | 王晓溪 | 等通道双转角挤压工业纯钛的剧烈塑性变形行为 | 2023.10 | 核心 |
| 塑性工程学报 |
26 | 刘磊 | 水介质空化溃灭作用下不锈钢表面损伤实验及教学拓展 | 2023.01 | 核心 |
| 实验技术与管理 |
27 | 刘磊 | 空泡溃灭与Al2O3颗粒联合作用下的材料强化模型及实验验证 | 2023.01 | 核心 |
| 液压与气动 |
28 | 刘磊 | 高压大流量纯水液控单向阀冲击特性与气蚀损伤的关联性 | 2023.01 | 核心 |
| 液压与气动 |
29 | 伍文进 | 熔融沉积技术喷嘴结构尺寸优化研究 | 2023.03 | 核心 |
| 机床与液压 |
30 | 滕凯 | 气液双介质电火花线切割精加工研究 | 2023.01 | 核心 |
| 机械设计与制造 |
32 | 孙健 | 标准齿轮及大变位系数齿轮建模研究 | 2023.05 | 普刊 |
| 河南科技 |
33 | 孙健 | 适老化辅助站立装置 | 2023.03 | 普刊 |
| 河南科技 |
34 | 孙健 | 液压破碎锤的工作原理与研究现状 | 2023.05 | 普刊 |
| 河南科技 |
36 | 汪澎 | Research and Analysis of Teaching Functions Based on | 2023.11.1 | 普刊 |
|
|
37 | 汪澎 | Under | 2023.11.1 | 普刊 |
|
|
38 | 张宏艳 | 电动自行车用电池保护电路的设计 | 2023.05 | 普刊 |
| 科学与财富 |
40 | 伍文进 | “7S”管理理念在金工实习教学与管理工作中的应用研究与实践 | 2023.09 | 普刊 |
| 中国现代教育装备 |
41 | 张宁 | 碳化咖啡渣增强Sn0.3Ag0.7Cu钎料填充泡沫铜焊点组织和性能的研究 | 2023.03 | 会议论文集 |
| 第三届异质材料焊接与连接先进技术研讨会 |
42 | 郭华锋 | 超音速火焰喷涂微纳米陶瓷涂层组织性能分析及激光重熔研究 | 2023.11 | 专著 |
| 中国矿大学大学出版社 |
43 | 秦录芳 | 正交车铣运动学和动力学关键技术研究 | 2023.01 | 专著 |
| 中国矿业大学出版社 |
44 | 毛瑞卿 | Creo 三维造型设计 | 2023.09 | 教材 |
| 西北工业大学出版社ISBN978-7-5612-8917-4 |